CHILTERN CYCLES

After working on some more parts for the CB125T over winter I decided if I was going to have a chance of actually keeping up with the fast guys at the kart track, or doing a half decent lap time at Timaru then I'd need a better chassis than that of the old Honda. I had made some straight intakes to replace the OEM ones, but didn't notice that in order for them to fit on the engine in the 125 frame, I'd need to either modify the frame or mount them on an angle... it was an eas

In early 2024 I started building up a bucket racer for the coming season's racing at the local kart track. The bike was in a bit of a sorry state, no brakes, forks were partially disassembled, engine had low compression on one of the cylinders and so on... I got the bike for free so I can't complain too much. The bike is based on a CB125T, the wheels and front end are from a TZR250 2MA. Bike when I first got it I stripped the top end off the engine, the left piston looked pre